Led Wall Panels Display
12.6' x 6.3' FT
When a screen is going to live on camera, the margin for error gets smaller. Studio walls must hold detail at close range, stay visually stable under filming conditions, and integrate cleanly into a production workflow that may involve live switching, replay, branded graphics, or virtual set design. Our Broadcast-Ready P1.53mm LED Wall is built for those environments, giving studios a fine-pitch solution that looks controlled, polished, and dependable where it matters most.
specs
Pixel Pitch: 1.53
Pixel Density: 416 x 312 per panel
High Refresh Rate: 7680Hz
LED Configuration: 3-in-1 SMD1212 LED
Size: 25.2” x 18.9” x 3” / 640 x 480 x 75mm
Weight: 9.6Kg
Full Front Service: Magnetic Modules
Module Quantity: 6 per panel 320 x 160mm
Close-Range Camera Work Starts with the Right Surface
Close-Range Camera Work Starts with the Right Surface
A studio display should not feel coarse or oversized once the camera moves in. That is one of the biggest reasons fine pitch matters in broadcast settings. At 1.53mm, this LED wall is built for tighter viewing conditions, helping on-screen content appear more precise in spaces where detail is constantly being captured, monitored, and evaluated.
Distance 3ft
1.53MM
This package also accommodates a wide range of signal paths, with support for Composite, S-Video, Component, VGA, DVI, HDMI, and HD-SDI. That flexibility makes it easier to connect the wall to studio equipment, media servers, switchers, playback systems, and other production tools without narrowing the workflow.
Studios are rarely designed around easy rear access. In many cases, the LED wall is integrated into scenic construction, support framing, or tightly planned production areas. This is where full front serviceability becomes a practical advantage. With magnetic modules, technicians can access and replace sections from the front, reducing disruption when service is needed.
More Flexible Than a Single Studio Layout
More Flexible Than a Single Studio Layout
Are often the cleanest choice for permanent broadcast studios and built-in scenic environments.
Can serve temporary production spaces, test stages, or modular set builds.
Are ideal for studios that need structural flexibility, scenic reconfiguration, or suspended integration with other production equipment.
This package is backed by U.S.-based availability, all parts in stock, and technical support ready when needed, helping studios move more confidently from planning to installation. The modular panels are manufactured by Mirackle, giving the package a proven LED foundation while LED Market supports the process around it with faster access to product and service.
Our LED panels feature reinforced corners and protective caps, ensuring enhanced durability and safety during transport and installation. This innovative design reduces the risk of damage, extends the lifespan of the panels, and minimizes maintenance needs, making them ideal for both indoor and outdoor applications.
This LED wall is rated for 100,000 hours of operation, giving studios a display solution designed for extended use over time. To reinforce long-term value, the package includes a 5-year warranty for all parts, adding another layer of confidence for production teams investing in a wall meant to perform well beyond the first project.
Turn-Key Packages
Turn-Key
Packages
5-Year Warranty
5-Year
Warranty
Technical Support
Technical
Support
Package Includes
LED video tiles
for rigging (*)
included
Link Cables
link cables
Edison Cables
cable
A Studio Wall That Holds Up Under Real Production Demands
In camera environments, presentation matters — but consistency matters even more. This Broadcast-Ready P1.53mm LED Wall for Studio and Camera Environments is designed for teams that need fine-pitch clarity, dependable control, service-friendly construction, and support that matches the pace of production.
technical specifications
- Full Front Service / Magnetic Modules
- Turn-key solution
- Easy installation
- Ground support compatible (sold separately)
- Download full specifications here
- Technical support available
- 5-year warranty included for all parts
- USA based
- In stock
- Operation Power: 100~240V 50-60Hz
- Max. Power Consumption: 200W/per panel
- Ave. Power Consumption: 120W/per panel
- Connections Power/Data: Locking power In/Out; Data EtherCon In/Out
- Control Mode: NovaStar Synchronous System with Control via DVI
- Frame Update Frequency: 50-60Hz
- Scan Mode: 1/28
- Refresh Rate: 7680Hz
- Support Input: Composite, S-Video, Component, VGA, DVI, HDMI, HD_SDI
- Brightness Correction: Pixel, Module, Cabinet
- Pixel Pitch: 1.53mm
- High Refresh Rate: 7680Hz
- Full Front Service / Magnetic Modules
- Novastar A8 receiving card
- LED Configuration: 3-in-1 SMD1212 LED
- Pixel Density: 416 x 312 per panel
- Size: 25.2” x 18.9” x 3” / 640 x 480 x 75mm
- Module Quantity: 6 per panel 320 x 160mm
- Weight: 9.6Kg
- Brightness: 1200 NITS
- View Angle: Horizontal 160°/Vertical 160°
- Distance: 5ft.
- Brightness Adjustment: 0~100% 100 Levels
- (24) NovaStar P1.53mm Indoor LED video tiles
- (1) Video Processor with HDMI, DVI and VGA Inputs
- (6) Hanging bars for rigging (*)
- (6) Cat6 25ft cable
- (24) Data Cat6 link cables
- (24) Locking Power Link Cables
- (3) Locking Power to Edison Cables
- Spare parts included
- Operating Life: 100,000 Hours
- Protection Level: IP45 (Front and Back)
LED Wall Panels 12.6’ x 6.3’ P1.53mm
With 24 total tiles (6×4), the new 12.6’ x 6.3’ LED screen exudes sophistication amongst our indoor line-up. Destined to be a vehicle for transmitting impactful visuals and information in small areas. This panel can captivate a large audience, making sure no details of your message or advertisement are missed. This P1.53mm led wall for virtual productions is a prime LED turn-key package. Small, but powerful. It will grant you ultra performance, superior image quality, and motion smoothness – period. Closeness matters Although there are several models which stipulate a certain optimal viewing distance: this LED champions closeness. The audience can be positioned just 5ft from the pixel of the screen, thus branding at conventions or television studios are ideal places for reproduction of any audiovisual material or digital signage. Strategic placement Just as in restaurants, bars, cinemas or theatres – positioning of this LED video wall screen must be strategic to attract the greatest amount of attention possible. For this reason, a key feature of the P1.53mm panel is its compatibility with hanging rigging bars; designed to fit any stable indoor structure and allow “flying” of the video wall. Even more benefits Once the product order has been confirmed and executed – the client receives a 5-year warranty on all parts of the LED screen panel. They also receive a holistic technical support service: 24 hours a day, seven days a week. Make sure to ask about our installation services! Download full specifications here Key Features:- Full Front Service / Magnetic Modules
- Turn-key solution
- Easy installation
- Ground support compatible (sold separately here)
- Technical support available
- 5-year warranty included for all parts
- USA based
- In stock
- (24) NovaStar P1.53mm Indoor LED video tiles
- (1) Video Processor with HDMI, DVI and VGA Inputs
- (4) Hanging bars for rigging (*)
- (3) Cat6 25ft cable
- (24) Data Cat6 link cables
- (24) Locking Power Link Cables
- (2) Locking Power to Edison Cables
- Spare parts included
Specs:
- Pixel Pitch: 1.53mm
- High Refresh Rate: 7680Hz
- Full Front Service / Magnetic Modules
- LED Configuration: 3-in-1 SMD1515 LED
- Pixel Density: 416 x 312 per panel
- Size: 25.2” x 18.9” x 3” / 640 x 480 x 75mm
- Module Quantity: 6 per panel 320 x 160mm
- Weight: 9.16Kg
- Brightness: 1200 NITS
- View Angle: Horizontal 160°/Vertical 160°
- Distance: 5ft (1.5m)
- Brightness Adjustment: 0~100% 100 Levels
- Operation Power: 100~240V 50-60Hz
- Max. Power Consumption: 200W/per panel
- Ave. Power Consumption: 120W/per panel
- Connections Power/Data: Locking power In/Out; Data EtherCon In/Out
- Control Mode: NovaStar Synchronous System with Control via DVI
- Frame Update Frequency: 60Hz
- Scan Mode: 1/52
- Refresh Rate: 7680Hz
- Support Input: Composite, S-Video, Component, VGA, DVI, HDMI, HD_SDI
- Brightness Correction: Pixel, Module, Cabinet
- Operating Life: 100,000 Hours
- Protection Level: IP45 (Front and Back)
